Further functions, 1 com port setting, 1 manual setting – Eppendorf BioPhotometer Data Transfer User Manual
Page 26: Further functions 7.1, Com port setting 7.1.1, Manual setting, 7 further functions, Further func tions
7 Further functions
BioPhotometer Data Transfer Software — Operating Manual
26
7
Further functions
7.1
COM Port setting
The standard setting of the software is designed to automatically scan for the COM Port interface
after the device and software are switched on. As soon as the software finds the corresponding
COM Port with the switched-on BioPhotometer plus, a message appears under Data Output:
Connected Device: BioPhotometer plus found at COM 1
Alternatively, you can set the COM Port manually. In this case only this COM Port is checked for
a switched-on BioPhotometer plus.
7.1.1
Manual setting
Proceed as follows:
1. Settings in the Menu Select file.
The following window opens:
2. Activate the manual entry in the area Devices: Manual device configuration
7
Further func
tions