AirLive WN-300USB - Manual (Page 25)

WN-300USB v3 User’s Manual 18
2.2.1.2 Connect to an Access Point
If the wireless access point you wish to connect is found, you can establish connection with it by
clicking ‘Connect’ button. Instructions will be given as follow:
1. Click the wireless access point or network device you wish to connect, it will be highlighted, then
click ‘Connect’.
If the access point you selected does not use encryption, you’ll be connected to this wireless
access point within one minute. If the access point you selected uses encryption, please proceed
to step 3.
2. If the wireless access point does not have SSID, you’ll be prompted to input it now. Please ask
the owner of wireless access point for the exact SSID and input it here, then click ‘OK’ when
ready. If the SSID you provided here is wrong, you’ll not be able to connect to this access point.