AirLive WN-300USB - Manual (Page 37)

WN-300USB v3 User’s Manual 30
6. All wireless access points in proximity will be displayed here. If the access point you want to use
is not displayed here, please try to move your computer closer to the access point, or you can
click ‘Refresh network list’ to rescan access points. Click the access point you want to use if it’s
shown, then click ‘Connect’.
7. If the access point is protected by encryption, you have to input its security key or passphrase
here. It must match the encryption setting on the access point.
If the access point you selected does not use encryption, you’ll not be prompted for security key
or passphrase.