AirLive WN-300USB - Manual (Page 32)

25 WN-300USB v3 User’s Manual
encryption is not enabled, or you select ‘WPA’ as encryption type, this field will
be disabled and grayed out. You can set up to 4 WEP keys here.
There are two types of WEP key: Hexadecimal and ASCII. For Hexadecimal
key, you can input number 0-9 and alphabet a-f; for example, ‘001122aabbcc’;
For ASCII key, you can input number 0-9 and alphabet a-z; for example,
mywepkey12345.
The length of WEP key depends on the type of WEP key you selected. You can
input 10 or 26 hexadecimal characters and 5 or 13 ASCII characters as WEP
key.
Show Password Check this box and all passphrases or security keys you inputted will be
displayed as you type, but not replace your input with asterisk.
Use 802.1x If the access point you wish to connect requires 802.1x authentication, please
click on ‘Use 802.1x’ box, then click ‘802.1X’ tab to set 802.1x parameters.
To set 802.1x authentication for the access point. Please click ‘802.1X’ tab:
Here are descriptions of every setup item:
Item Name Description
EAP Method Select 802.1x EAP method from dropdown menu. Please ask the administrator
of the access point you wish to connect to select a correct EAP method.
Tunnel
Authentication
Select 802.1x tunnel authentication type from dropdown menu. Please ask the
administrator of the access point you wish to connect to select a correct tunnel
authentication method. This pull down menu is only available when
authentication type you use is 'PEAP', ‘TLS / Smart Card', or 'TTLS'.