AirLive WN-300USB - Manual (Page 52)

45 WN-300USB v3 User’s Manual
You can click ‘PBC’ button few more times to try again. When an access point is connected, you
can click ‘Disconnect’ to disconnect your wireless network card from a connected access point,
or select another WPS-enabled wireless access point, then click ‘Connect’ to establish
connection to selected access point, if there are more than one WPS-enabled access point found.
You can also click ‘Rotate’ button, and next access point on the list will be selected to establish
connection.
If you want to delete a found access point from the list, select it and click ‘Delete’ button.