AirLive WN-300USB - Manual (Page 27)

WN-300USB v3 User’s Manual 20
If the value you inputted here is wrong, you will not be able to connect to this wireless access
point.
Authentication type will be selected by the authentication type of the access point
automatically, please don’t change it.
However, if you’re connecting to an access point uses 802.1x authentication, you have to check
‘802.1x’ box and input related information. Instructions for 802.1x authentication will be given
later.
5. If the wireless access point is successfully connected, you’ll see a symbol appears in front of
the name of wireless device.
You can put the mouse cursor over the AirLive configuration utility icon, and the brief information
about link status and signal strength of current wireless connection will be shown as a popup
balloon.
You can also click More / Less button ( ) to see detailed information of connected
access point: