CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 39)

English | 39
To add a sequence
1. Click <ADD> in the bottom of the screen.
2. When the "ADD" dialog appears, enter a title using the
virtual keyboard.
3. Enter the name of the sequence and click <ADD>.
4. When the <ADD VIEW TYPE> dialog appears, click
<ADD>.
5. When the "SEQUENCE SETUP" dialog appears, select
a split mode that you want to add from <VIEW TYPE>.
6. If the selected split mode is displayed on <VIEW
CONFIGURE>, select a channel you want to display
in each split screen.
7. Click <CONFIRM>.
The set sequence mode is confirmed and will be
added to the Add Sequence list in order
8. When done, click <CLOSE> in the bottom of the
screen.
After the sequence type is saved, you will return to
the previous screen.
9. Place your mouse cursor over a desired tile of added
Sequence, right click on it or press the [ENTER] button of the remote control to edit or delete it.
Sy
ste
m
S
ett
ing