CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 63)

English | 63
Record Setup
\ \ Operation Mode
You can set the recording options for Auto or Manual mode.
1. From <RECORDING> menu, select <OPERATION MODE>.
2. Use the [ ▲▼◀▶ ] buttons or use the mouse to set <RECORDING CONFIGURATION MODE> to <AUTO
CONFIGURATION> or <MANUAL CONFIGURATION>.
3. Set the recording options for each selected Record mode.
4. To apply the change, click <APPLY> in the bottom of the screen.
5. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Auto Configuration
If you choose your preferred record mode, the DVR will recommend you the optimized settings for the selected record mode.
i
ALWAYS HIGH VIDEO QUALITY : Recording will
proceed in the best quality regardless of the event
at all times.
As this option will always make recording in the
best quality, the recording period is the shortest
compared to the other record modes.
i
MOTION RECORD : Recording will proceed only if
a motion is detected.
i
ALARM RECORD : Recording will proceed only if
an alarm event occurs.
i
MOTION/ALARM RECORD : Recording will proceed
only if a motion is detected or an alarm event occurs.
i
INTENSIVE MOTION RECORD : Normally
recording will be performed in a normal quality.
However, the quality will switch to high if a motion is detected.
i
INTENSIVE ALARM RECORD : Normally recording will be performed in normal quality. However, the quality will
switch to high if an alarm event occurs.
i
INTENSIVE MOTION/ALARM RECORD : Normally recording will be performed in normal quality. However, the
quality will switch to high if an alarm event occurs or a motion is detected.
 Motion : Normally, it means the movement of an object. However, it implies a change to the illumination in the context of the DVR.
Ex) Vehicle lights (headlights), illumination change, etc.
Manual Configuration
If you set the record mode to <MANUAL CONFIGURATION>, the manual configuration window will appear where you
can set the manual recording and panic recording options.
i
MANUAL CONFIGURATION OPTIONS : You can
configure the recording settings by the time, date,
and channel.
- SCHEDULE MODE : Set the recording
schedule for a day (daily) or for a week (weekly).
- PRE RECORDING TIME : Set the pre-recording
time.
- POST RECORDING TIME : Set the post-
recording time.
i
PANIC RECORDING OPTIONS : Set the panic
recording duration. If it is set to <MANUAL
CONFIGURATION>, recording will continue until
you turn it off manually.
Re
co
rd
S
ett
ing