CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 78)

78 |
Web Viewer
Web Viewer
What is the Web Viewer?
Web RA is a user-friendly software application that enables you to control the video data in connection with a remote DVR.
\ \ System Requirements
The following is the minimum hardware and operating system requirements to run Web RA.
Operating System
Windows XP Professional
Windows Vista Home Baisc / Premium
Window 7
Web browsers:
Internet Explorer 7.0 or later/Mozilla Firefox 3.6/Google Chrome 4.1/Opera 10
Some web browsers other than Internet Explorer may not fully function.
CPU Intel Pentium 4 / 2.0GHz or higher
Memory 512 MB
Display 16-bit 1024 x 768 High Color
Hard Disk Drive
50 MB (space required for installing the web viewer)
* Additional HDD space is required for saving your recording data.
The file size of your recording may differ depending on the specified quality.
\ \ Connection
Open a browser and enter the IP address of DVR, or type the URL in the address bar.
To connect to the DVR from inside
- Check the "Network Status" and verify the
<IP ADDRESS> and <WEB SERVICE PORT>
of the DVR. (page 47)
- Enter the IP address and web service port in the
address bar of the browser.
Ex) http://192.168.1.200:8080
To connect to the DVR from outside
~ Using the IP address
- Check the "Network Status" and verify the <EXTERNAL IP ADDRESS> and <WEB SERVICE PORT> of the
DVR. (page 47)
- If using a fixed (external) IP, enter the external IP that is specified in the DVR in the address bar of the web browser.
Ex) If the internal IP address is set to "http://222.112.4.48:8080" (192.xxx.xxx.xxx), no access from outside is
allowed.
~ Using the URL
- Check the "Network Status" and verify the <DDNS ADDRESS> and <WEB SERVICE PORT> of the DVR. (page 47)
- Enter the DDNS address and web service port in the address bar of the browser.
Ex) http://00115f123456.DVRLINK.NET:8080
 In a router network, you have to set the "Port Forwarding" and "DMZ Setting" to allow access from outside.
 For the necessary settings of the router, refer to the user manual of the router or contact the manufacturer of the router.