CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 65)

English | 65
Schedule Setting
1. Select a start day of the week on the schedule.
2. Click a time cell from which you want to make the
schedule and drag it to a desired cell.
Or use the [ ▲▼◀▶ ] buttons on the remote control to
move to the cell and press [ENTER]. Then, use the
[ ▲▼◀▶ ] buttons to move to a desired cell and press
[ENTER] again.
3. When the time selection is complete, you will be
prompted to specify the use of recording in the
Record Setup window.
4. To apply the change, click <APPLY> in the bottom of
the screen.
5. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
\ \ Motion Recording
Specify the recording size of the motion event if it occurs and make schedule for that recording.
1. From the <RECORDING> menu, select <MOTION
RECORDING>.
2. Use the [ ▲▼◀▶ ] buttons on the remote control or use
the mouse to select either <SIZE/FPS/QUALITY> or
<SCHEDULE>.
3. Set each item of <RESOLUTION>, <FPS>, <QUALITY>
and use of the <AUDIO> for the motion recording.
 For more information, see the "Continuous Recording".
(page 64)
4. To apply the change, click <APPLY> in the bottom of
the screen.
5. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Re
co
rd
S
ett
ing