CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 51)

English | 51
\ \ System Information
You can check the current system version and system-related settings.
1. From <SYSTEM SETUP> - <SYSTEM>, select
<SYSTEM INFORMATION>.
2. Check the status of the current system.
3. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to
return to the previous menu.
\ \ Control Device
Configure the settings of the remote control and keyboard controller.
 This function is provided for controlling individual DVR separately using a control device or remote control, in case the site has multiple
DVRs of the same model.
1. From <SYSTEM SETUP> - <SYSTEM>, select
<CONTROL DEVICE>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to set the connection
options for the control device.
i
SYSTEM ID : Set the ID of the DVR so that the
keyboard controller can identify.
i
PROTOCOL : Set up the protocol of the keyboard
controller.
i
BAUD RATE : Specify the RS485 communication
speed.
i
REMOTE CONTROLLER ID : Set the ID of the remote control.
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
Sy
ste
m
S
ett
ing