CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 53)

English | 53
\ \ Disk Operations
You can set to delete the recording automatically and set the overwrite options, and you can also format the HDD
recording data.
1. From <SYSTEM SETUP> - <STORAGE>, select
<DISK OPERATIONS>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to set the operation
conditions of the disk.
i
DISK WRITE MODE
- If it is set to <OVERWRITE>, the existing data
will be overwritten by new recording data if the
recording data size exceeds the free space of
the HDD.
- If the option is set to <ONCE> and the HDD is
full, the DVR will stop recording and output the
beep or alarm that is pre-defined at <EVENT>.
i
RECORDING TIME LIMIT : The recording data will be deleted after a specific time of reservation. If it is set to
<OFF>, this function will be disabled.
 Ex) Record Time Limit : 1 day Even if there is sufficient free space in the HDD, it records / keeps videos of the most recent 1 day only.
i
DISK FORMAT : format the hard disk.
J Note that formatting the HDD will delete all video data and logs.
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
\ \ S.M.A.R.T settings
You can check the S.M.A.R.T information of the disk and specify the check frequency.
 What is S.M.A.R.T information?
S.M.A.R.T (Self-Monitoring, Analysis and Report Technology) is to detect a HDD that is likely to cause a problem in the future with a
warning message.
1. From <SYSTEM SETUP> - <STORAGE>, select
<S.M.A.R.T. SETUP>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to check the S.M.A.R.T
operation and specify the check interval.
i
S.M.A.R.T STATUS : Read the S.M.A.R.T
information of the disk and check to display if the
current disk is in normal operation.
Click <DETAIL INFO> to view the details.
Sy
ste
m
S
ett
ing