CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 42)

System Setting
42 |
System Setting
Audio Setup
You can configure audio related settings (channel and network transfer) and signal beep for remote control operations.
\ \ Audio
Choose whether to receive the live sound source and select an audio channel.
1. From <SYSTEM SETUP> - <AUDIO>, select
<AUDIO>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
i
DEFAULT LIVE AUDIO CHANNEL : select an audio
channel to monitor on the live screen.
i
NETWORK AUDIO TRANSMISSION : decide if
DVR transfers the audio signal to the remote client.
DVR  PC (Remote Client)
i
RECEIVE NETWORK AUDIO : decide if DVR
receives the audio signal from the remote client.
PC (Remote Client)  DVR
3. To apply the change, click <APPLY> in the bottom of the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.
\ \ Buzzer
You can set to output the buzzer if you manipulate the remote control.
1. From <SYSTEM SETUP> - <AUDIO>, select
<BUZZER>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
i
REMOTE CONTROLLER : specify the output of
a beep when you press a button on the remote
control.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen. The confirmation message appears and you will return to the previous
menu.