Comelit RAS_SOLUTION - Manual (Page 10)

3
Chapter 2 — Installation
2.1 Installation
Before installation, shut down and remove any previous installed versions.
Do not install this on a network drives, otherwise the software MAY not work properly.
Procedure
1. Insert the software CD/DVD; then click the installation link.
Alternatively, if you are installing the file version, run the installation file from the location.
Depending on your security settings, you MAY get one or more security warnings. If that is the case,
click the Run button.
2. When the installation wizard starts, click ‘next’ to continue.
3. Read and accept the EULA (End User License Agreement), then click ‘next’.
4. Select ‘typical installation’ and follow the instructions.
5. Click Finish to complete the installation.
2.2 Upgrade
With the live updating function, the software may be upgraded at your convenience. The old configuration
will be automatically converted to the new format. The previous configuration will be applied to the
updated software.
You don’t need to remove the current version of the software manually. The installation of the new
version will remove the current version automatically.
Do not use the old version of software with the new configuration. The new configuration MAY not work
with the old version of software.
Back up your current configuration
When you install the new version, it will take the configuration from your old version and convert it to the
new format of configuration automatically. However, we recommend that you make regular backups of
your configuration.
Procedure
1. Create a folder to backup the configuration on a network drive or removable media device.
2. Open ‘My Computer’ with the explorer and C:\ProgramData\Comelit RAS Solution\ (case of Windows 7).
3. Copy the files and folders to your backup folder.