Comelit RAS_SOLUTION - Manual (Page 26)

19
Figure 19 Emap
3.7.1 Load background image
① Click the Emap tab.
② Select the Layout item from the combo-box to design Emap.
③ Click the Load Emap Background Image button ( ) and select the image. Available image formats
are JPG, PNG and BMP.
* The recommended Emap background image size is 800 x 600. If the image size is too big, it MAY take a
little time to operate with it. If the image size is too small, E-map design and operation MAY not run
optimally.
* The loaded images (background image, user device, user sensor and user link images) are copied to the
specific directory automatically. If you remove the background images manually from that directory, it
MAY lead to problems in operating Emap functions.
3.7.2 Device design
① Select the device(s) and drag it (them) to your target location.
② Select a device and click the right mouse button.
③ The Rename is to set a specific name only for Emap.
④ The Open Live View option serves to open a popup window displaying the live stream.
⑤ The Change Image option serves to change the device icon.
⑥ If you want to use your own device image, click the Load Emap User Device Image button ( ) and
select the image file. Available image formats are JPG, PNG and BMP. And the height of image MUST be
84 pixels and the width MUST be multiple of 28 pixels.
The top image represents normal, middle does selected, and the bottom is for event notification.
* Please refer the sample images which are installed.
C:\ProgramData\Comelit RAS Solution\MonitoringService\Emap\ (case of Windows 7)