Comelit RAS_SOLUTION - Manual (Page 87)

80
Chapter 14 – Event View
This describes the Event view. The Event view has similar functions of the Live view. The different thing is
that the event layout would be popped up automatically if the event is set. Please refer the ‘4.1 Event
Setup – Device’.
Click the Event tab.
Figure 82 Event View
14.1 Event View
The Event view has the event screens and the event list. The event screens have similar functions of the
Live except sequence controls, split controls and event channel setting.
You can drag devices, layout and sequences. The split mode is able to be controlled by the key pressing.
Please refer the ‘Appendix D-Keys’.
If value of the event displaying dwell time is the Infinite, then the event layout would be shown
continuously. But if the other event is occurred and it was set to show the other layout, then it would be
switched. Even though the other event is occurred, if the displaying layout time is not over 5 seconds, it
would not be switched. In that case, the event would be listed.
14.1.1 Toolbar control
Please refer the ‘10.3.1 View toolbar’ and ‘11.7.2 Position’.
14.1.2 Screen title and toolbar
Please refer the ‘10.3.3 Screen title and toolbar’.