Comelit RAS_SOLUTION - Manual (Page 21)

14
3.3.3 Quick view
This is to see the video/image stream from the device instantly.
① Select the device item(s) from the list.
② Click the right mouse button.
③ Select the Quick View menu.
④ Select the video/image stream profile and connection type from the combo-boxes.
⑤ The Stop/Play button is to stop and resume the video/image stream.
3.3.4 Assign IP
This is to assign the IP address for the selected device.
①
Select the device item(s) from the list.
②
Click the right mouse button.
③
Select the Assign IP menu and click the Ok button.
④
The result will automatically assign the selected device with a new IP address.
* After changing the IP address, click the Refresh button. Otherwise, visually, the IP address won’t reflect
the changes.
3.3.5 Maintenance
There are 3 maintenance functions, Restart, Reset and Factory Default. The Reset function MAY be
operated differently depending on the device model.
Table 5 Maintenance
Restart Restarts the device without any changes
Reset
Resets the configuration except some specific values (ex. network)
The client may need to be restarted for the changes to take place.
Factory Default
Resets all configurations to the default factory settings.
The client may need to be restarted for the changes to take place.
* After the Factory Default, the device MAY need some time to recalibrate and connect.
3.3.6 Upgrade firmware
①
Select the device item(s) from the list to upgrade.
②
Click the right mouse button.
③
Select the Upgrade Firmware menu.