Comelit RAS_SOLUTION - Manual (Page 34)

27
Chapter 5 – User Setup
This supports multi-users. Each user is able to be assigned the device, layout and sequences. This
describes how to configure users and authorities. The default administrator user ID is “admin” and the
password is “admin”. After installation, please change the password of the “admin” for safety. The
“admin” is not able to be removed.
Figure 26 User Setup
Save the configuration otherwise the changes will not be applied. The old configuration would be saved in
the specific directory. The old configurations MAY be useful to get technical support. The old configuration
saving directory is C:\Program Data\Comelit RAS Solution\MonitoringService\Logs, case of Windows 7.
This keeps maximum 20 old configurations.
5.1 User Setup – User
Select the User menu.
5.1.1 Add user
① Select the User tab.
② Click the Add button.