Comelit RAS_SOLUTION - Manual (Page 25)

18
Figure 18 Disk
1) Disk assignment
① Select the Disk tab.
② Select the device(s) from the tree and drag into the disk tree to assign recordings.
③ Set up the recording disk properties.
* The streams which are from the same devices will be assigned automatically to the same disk drives.
* To utilize the disk performance, the streams are assigned to the separate disk drives.
* The Retention Time is to preserve the time of the recording data if the disks are available.
* The Reserved Disk Size is the recording disk size for the selected disk drive.
3.6 System Setup – Layout
This is to design the Layout. The Layout is used to view the layout as well as the Emap. Please refer the
‘3.2.2 Layout for adding, renaming and removing layout’.
3.7 System Setup – Emap
This is to design Emap using the layout.