Comelit RAS_SOLUTION - Manual (Page 17)

10
3) Remove channel/layout sequence
①
Select the sequence item(s) to remove from the tree.
②
Click the right mouse button.
③
Select the Remove Channel Sequence / Remove Layout Sequence menu from the popup menu.
④
Confirm removing sequence from the message.
* Press the Delete key to remove the tree item(s).
4) Design channel / layout sequence
①
Select the Sequence tab and select a channel / layout sequence name in the combo-box.
Figure 9 Sequence
②
Select a group/(a) device(s)/(a) layout(s) from the tree and drag into the sequence to set up.
③
Set up the dwell time to display device/layout.
④
If you want to delete a device/layout from the sequence, select the device/layout from the
sequence and click the right mouse button.
⑤
Select the Remove menu option from the pop-up menu.
3.2.4 Device searching
There is an edit-box which is for searching device item.