Condux APS75 Underground Pulling Trailer - Manual (Page 6)

6
Technical Specifications
The Condux APS75 Hydraulic Underground Pulling Trailer provides up to 7500 lbs
of continuous pulling force. Designed for installing underground cable, the APS75 is
completely self-contained and transports easily from jobsite to jobsite. Industry
leading features like a standard Electronic Control System, a mobile joystick, and
antiwist rope make the APS75 the most advanced puller in the market today.
A. OPERATIONAL CONDITIONS
Temperature: from -10°C to +40°C, 15-105° F
Relevant moisture: from 30% to 90% ± 5%.
Weather conditions: any (in line with working conditions).
Natural and/or artificial lighting of the working site.
B. HYDRAULIC OIL
When using the machine always keep in mind operating conditions and their
effect on the possibility of your exceeding the following temperature limits for the
system’s hydraulic oil.
For additional information concerning the hydraulic oil, see chapter
“Maintenance” and the attached comparative table of the oils used on
the machine.
C. CALIBRATION
This unit uses Hydraulic Working Pressure to calculate pulling tension. As a
result, the tension readings must be set under dynamic loading. The unit should
not require regular calibration, although Condux can review and reset the load
curve at their factory.
4. 2.
GENERAL SPECIFICATIONS PULLER
MAX LINE PULL, POUNDS 7500
MAX PULLING SPEED, FEET PER MINUTE 170
BULL WHEEL DIA., INCHES 9
MAX ROPE DIA., INCHES 3/8
FEET OF ROPE 2600
ENGINE TYPE DIESEL
HORSEPOWER 34
ELECTRICAL SYSTEM 12 Volt