Dakota Ultrasonics MX-5 DL - Manual (Page 10)

Dakota Ultrasonics
6
The MEM key enables/disables the data logging feature of the MX-5
DL. This key is used in conjunction with the UP/DOWN arrows, SEND,
AND CLR keys (hi-lighted in green). The combination of these keys
control the data logging features of the MX-5 DL. Refer to the section on
data logging page 24.
The CLR key is specifically used with the data logging feature of the
MX-5 DL. This key clears the contents of an entire file, or individual
storage locations. The CLR key is also used to send an obstruct (ObSt) to
an individual storage location. The ObSt symbol would indicate that a the
user was unable to take a reading at a particular location. Refer to the
section on data logging page 26.
The SEND key is used for sending data to internal storage locations,
and external peripheral devices ( serial printer / computer ). The SEND key
is also used to select data logging functions in the MX-5 DL page 24.