Dakota Ultrasonics MX-5 DL - Manual (Page 25)

MX-5 DL Ultrasonic Thickness Gauge
21
Using the Beeper
1) Press ON/OFF key to power up the unit.
2) Press MODE key to activate features and settings.
3) Press the UP or DOWN arrow keys to scroll to bEEP.
4) Press the SEND key to toggle the status of the beeper on/off.
5) Press the MODE key once again to return to measurement mode.
Alarm Mode
1) Press ON/OFF key to power up the MX-5 DL.
2) Press the MODE key to activate features and settings.
3) Mode will start with ALAr feature and current status.
4) Press send key to toggle ALAr status on/off.
5) Status ON - A nominal value will be displayed with the units IN/MM
flashing.
6) Press the UP or DOWN arrow keys to scroll to the desired nominal
thickness value.
7) Press the SEND key to select the desired nominal value and return
to mode menu.
8) Press the MODE key once again to return to measurement mode.