Dakota Ultrasonics MX-5 DL - Manual (Page 22)

Dakota Ultrasonics
18
thickness values that were entered in step 7. The MX-5 DL is now
ready to perform measurements within this range.
MX-5 DL Modes
Changing Units IN / MM
The MX-5 DL has the ability to display measurements in both the
English (IN) and Metric (MM) systems. The following steps outline the
procedure for changing units:
1) Press ON/OFF key to power up the MX-5 DL.
1) Press the MODE key to activate features and settings.
2) Press the UP or Down arrow keys to scroll to the unIt symbol.
3) Press the SEND key to toggle the status of the units - IN / MM.
4) Press the MODE key once again to return to measurement mode.