ETC Element v2.1.0 - Manual (Page 81)

6
Patch 69
• {Curve} - Used to assign a curve to an address in patch. In patch, curve is applied to intensity
parameters only. For more information on curves, See “Storing and Using Curves” on
page 201.
From channel view:
• [1] {Curve} [4] [Enter] - applies curve 4 to the intensity parameter of channel 1.
• [2] [Part] [3] {Curve} [3] [Enter] - applies curve 3 to the intensity assigned to channel
2, part 3.
From address view:
• [3] {Curve} [3] [Enter] - assigns curve 3 to address 3.
• [3] [/] [2] {Curve} [4] [Enter] - assigned curve 4 to universe 3, address 2.
• {Fan Curve} - Used to assign a curve to the scroller fan parameter, which allows for the output
of the fan to be controlled by the intensity of the channel.
• {LD Flags} - This field allows channels to contribute to live and dark move flags in the
playback status display. Disabling will prohibit those channel moves from contributing to the
live and dark move flags. This is enabled by default.
• {GM Exempt} - Used to exempt the intensity of a channel from grandmaster, blackout, rem
dim, and go to cue 0 operations.
• {Invert} - A moving light attribute used to invert the output of pan, tilt, or both. Select either the
{Invert Tilt} or the {Invert Pan} button on the CIA.
• [2] {Attributes} {Invert Pan} - inverts the output of the pan parameter.
• {Swap P/T} - A moving light attribute used to exchange pan and tilt levels. Select the {Swap}
button on the CIA.
• [2] {Attributes} {Swap P/T} - swaps the pan and tilt parameters for channel 2.
• {Scroller} - An attribute used to change the scroll loaded in a scroller or moving light. Select
the {Scroller} button on the CIA to display the scroller picker and the scrolls available for your
device.
See “Using the Picker” on page 59.
• [2] {Attributes} {Scroller} - opens the scroller picker in the CIA for scroll selection for
channel 2.
• {Gobo Wheel} - An attribute used to change the gobo wheel loaded in a moving light. Select
the {Gobo Wheel} button on the CIA to display the wheel picker with gobo options available
for your device.
See “Using the Picker” on page 59.
• [3] {Attributes} {Gobo Wheel} - selects channel 3 and opens the wheel picker in the
CIA for gobo wheel selection.
• {Color Wheel} - An attribute used to change the color wheel loaded in a moving light. Select
the {Color Wheel} button on the CIA to display the wheel picker with the options available for
your device.
See “Using the Picker” on page 59.
• [4] {Attributes} {Color Wheel} - selects channel 4 and opens the wheel picker in the
CIA for color wheel selection.
• {Effect Wheel} - An attribute used to change the effect wheel loaded in a moving light. Select
the {Effect Wheel} button on the CIA to display the wheel picker with effect options available
for your device.
See “Using the Picker” on page 59.
• [5] {Attributes} {Effect Wheel} - selects channel 5 and opens the wheel picker in the
CIA for effect wheel selection.
N o t e : When {Curve} or {Fan Curve} is pressed, a list of the available curves will be
displayed. Clicking on an available curve will assign it.