Move to – ETC Element v2.1.0 User Manual
Page 136
124
Element User Manual
Move To
Move To is used to move cues from one location in a cue list to another location in the list. Move To
is accessed by pressing [Copy To] [Copy To]. When cues are moved, values that were tracks or
move instructions and now match the previous cue will be auto-blocked by the system. The impact
on subsequent cues is based on track/cue only settings as described above. Below is an example
of Move To:
• [Cue] [2] [Copy To] [Copy To] <Cue> [9] [Enter] - the contents of cue 2 moves to cue 9. Cue
2 is deleted. If cue 9 already existed, a confirmation would be required to overwrite it.
In the above example, any tracked values in cue 2 become blocks (see
) or moves
in cue 9, as well as any move instructions which now match the previous cue. Cues after cue 9 are
affected based on the default setting of track/cue only. Any values in the cue after cue 2 that tracked
from moves in cue 2 are changed to move instructions.
Ranges of cues can be moved as well. If any cue is to be overwritten, a confirmation is required.