Bay Technical Associates BayStack 400-ST1 - Manual (Page 10)

8
• Stack IP MAC address --- The stack IP MAC address is
automatically assigned during the stack initialization:
The base unit’s MAC address, with a software offset,
is used for the stack IP MAC address.
For example, if the base unit’s MAC address is:
00-00-82-99-44-00
and the Stack software offset is: 1F
then the Stack IP MAC address becomes:
00-00-82-99-44-1F
If another unit in the stack is assigned as the base unit,
the MAC address of the new base unit (with offset)
now applies to the stack configuration. The original
stack IP address still applies to the new base unit.
Note: You can renumber the units when you
perform the initial setup of the stack as described
in the Using the BayStack 450 10/100/1000
Series Switch guide.