Bay Technical Associates BayStack 400-ST1 - Manual (Page 37)

35
5. Repeat Steps 1 to 4 for unit 5.
Figure 15. Removing Nonadjacent Units
6. Renumber the order of the units for the new stack
configuration (if desired).
You can renumber the unit numbers as described in
“Setting Up the Stack Configuration” in the Using the
BayStack 450 10/100/1000 Series Switch guide.
1 = Base unit
2 = Last unit
BS0044A
Unit 2
Unit 1
Unit 4
Unit 3
Unit 6
Unit 5
2
1
In
O
ut