Bay Technical Associates BayStack 400-ST1 - Manual (Page 8)

6
Cascade A In Connector
Provides an attachment point for accepting a cascade cable
connection from an adjacent unit in the stack. A return
cable from this unit’s Cascade A Out connector to the
adjacent unit’s Cascade A In connector completes the
stack connection (see the example shown in
Figure 3 ).
Figure 3. Connecting Cascade Cables
Cascade A Out
Unit 1
Cascade A Out Cascade A In
Unit 2
1 = Base unit
2 = 303978-A cascade cable
3 = 303978-A cascade cable (used for return)
BS0032A
Cascade A In Unit Select
Cascade A Out Cascade A In Unit Select
2 3
1