Bay Technical Associates BayStack 400-ST1 - Manual (Page 6)

4
If any items are missing or damaged, contact the sales
agent or the customer service representative from whom
you purchased the BayStack 400-ST1 cascade module.
You will need a Phillips screwdriver for the installation.
BayStack 400-ST1 Front Panel Components
The front-panel components of the BayStack 400-ST1
Cascade Module are shown in
Figure 2 . Component
descriptions follow the figure.
Figure 2. Front Panel Components
Note: Unless otherwise specified, the terms
“switch” and “unit” are used interchangeably in
this guide.
Cascade A Out Cascade A In
Unit Select
Base
1 = Blank connectors (unused)
2 = Cascade A Out connector
3 = Unit Select switch
4 = Cascade A In connector
3
BS0031A
4
1
2