Bay Technical Associates BayStack 400-ST1 User Manual
Page 24
22
b.
Connect the other end of the cascade cable to
the cascade A In connector on the unit just
below the base unit (unit 2), or just above the
base unit if cascading up the stack.
c.
Continue attaching the cascade cables until
the last unit is configured.
A maximum of eight units can be configured per
stack.
d.
At the last unit in the stack, connect one end of
a cascade max-return cable to the Cascade A
Out connector. Connect the other end of the
cascade max-return cable to the cascade A In
connector on the base unit.
When stacking 3 or more units, the (optional) 1
meter (39.27 inch) cascade max-return cable is
required (Bay Networks Part Number 303979-A).
8.
Be sure all cable connections to the cascade
connectors are secured firmly by the thumb screws
on the cascade cable plugs.
9.
” on
.