Lenze PLC Designer Migration PLC Designer (R2-x)-PLC Designer (R3-x) - Manual (Page 26)

Update of a project from V3.0 to V3.x
Updating the project environment
26
Lenze · PLC Designer | Migration of V2.x projects · 1.2 EN - 02/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. Upgrade the project environment to the current version (ProjectProject Environment):
• Update the following devices added to the device tree to the current version:
L-force Controller 3200
CANopen Manager (if available)
EtherCAT Master (if available)
PROFIBUS Master (if available)
All I/O modules connected to the backplane bus
• It is not required to update further devices.
3. Save project (FileSave project).
4. Clear project (BuildClean all)
5. Generate project (BuildGenerate code)
6. Transfer project to the V3.x target system (OnlineDownload)
7. Exit »PLC Designer« (FileExit)
8. Navigate to the directory where the Windows-specific Documents and Settings are saved
(the drive and name depend on the computer, for example: C:\Documents and Settings\All
Users\Application Data
• Change to the ...\Lenze\PlcDesigner\Devices subdirectory.
• Delete the devicecache.xml file.
9. Restart »PLC Designer«.