MTS Criterion Series 40 - Manual (Page 123)

Location of Crosshead Limit Stops
Description Item
Limit Rod 1
Upper Limit Stop 2
Lower Limit Stop 3
Limit Switch Actuator 4
Crosshead 5
10. Install the specimen.
Caution :
Failure to properly use the grips to secure a specimen can result in an insufficiently gripped
specimen.
An insufficiently gripped specimen can cause specimen damage, equipment damage, and
the possibility of specimen fragmentation.
Before testing, ensure both grips are clamped and the specimen is secure.
Continue your test procedure using the TW software.
MTS Criterion ™ Series 40 | 123
Best Practices for Other System Configurations and Tests