MTS Criterion Series 40 - Manual (Page 97)

1. Add a rule.
Click the green + sign in the upper right corner of the Configure Autotag Rules window.
2. Enter a variable.
Click the Variables tab, and then select PeakLoad from the list. PeakLoad appears in the
Calculation panel.
3. Enter a function and a value.
In the Calculation panel, enter <1800 immediately following PeakLoad.
4. Enter an error message.
Enter PeakLoad is less than 1.8kN in the Error Message text box.
5. Click Close.
MTS Criterion ™ Series 40 | 97
Reviewing, Analyzing, and Reporting Data