Bunn CDS-3 User Manual
Page 11
11
OTHER RECOMMENDATIONS FOR YOUR DISPENSER
•
Whether liquid concentrate or granulated powder, all product must be thoroughly mixed BEFORE adding it
to the hoppers.
•
For best results with granita-type products, use only products with an apparent brix of 12 or higher. Some
products may work with an apparent brix as low as 9. Your experimentation with other products will be the
best guide in this area.
•
Keep the premixed liquid product refrigerated. This reduces cooling/freezing time in the dispenser.
•
Keep the hoppers topped-off during peak serving periods. Add premixed liquid product as it is dispensed.
This reduces the cooling/freezing time and assures you of always having product ready to dispense.
•
Keep the product level in the hoppers higher than the auger. Air will become entrapped in the mixture
resulting in a clouded foamy consistency.
•
You may find it beneficial to turn down the ice controls to keep the ice granules from growing too large.
Refer to the operating controls on page 1-6.
•
Some products freeze at a lower temperature than others. You may notice frost or ice on the hoppers. This
is normal and should not be a concern.
•
Humidity in the air may cause sweating on the outside surfaces of the hoppers. This is to be expected and
should not be a concern. The drip trays beneath the hoppers will capture this and cause it to flow to the
lower drip tray for disposal.
•
Some noises are to be expected during normal operation of the dispenser. By becoming familiar with the
noises made during normal operation, you will be better able to listen for problems.
27646 022500