Oyen Digital DATATALE RC-M4QJ 4-BAY RAID - Manual (Page 14)

14
INSERTING/REPLACING THE HARD DRIVES IN
THE RAID SYSTEM
To assemble the RAID System, please follow the steps listed in the instructions
below:
1. Place the RAID System with its front view facing you. Position one hand on
the front edge and one on the back edge of the top lid. Simultaneously, push
the lid in the direction away from you, front to back, using your thumbs.
A “click” sound would indicate the release of the top lid security clasp.
2. Lift the top lid up to remove and expose the top view (or hard drive slots).
Take out the handles from the enclosure itself and locate the hard drive
screws in the packaging box.