Oyen Digital DATATALE RC-M4QJ 4-BAY RAID - Manual (Page 40)

40
ADVANCE RAID CONFIGURATION
SET UP RAID MODE
To setup the RAID System under the Advance Mode, please complete using the
following steps:
1. Please click on the second sub-menu icon (second top). The general
information of the inserted hard drives should appear as the “Advance
RAID Configuration”.
Then, click on “Create RAID” under “Configure RAID” box.
2. Under the “Create RAID” box, click and choose the preferred RAID Mode
under “Select a RAID type” option list. Once selected, the RAID MASTER
will automatically update the information on the right side for the inserted
hard drives if are assigned the chosen RAID Mode. Then, click on the
“Apply” icon to begin.