Oyen Digital DATATALE RC-M4QJ 4-BAY RAID - Manual (Page 45)

45
ADDING OR CHANGING A SPARE
To add a new Spare hard drive or change the current assigned Spare hard drive
for the RAID System under the Advance Mode, please complete using the
following steps:
1. Under the “Configure RAID” box, click the “Add Spare” icon and choose
the assigned RAID Mode under “Select a RAID to add spare disk(s)”
option list. Once selected, the RAID MASTER will automatically update
the information on the right side for the inserted hard drives for the
assigned RAID Mode. If had previously inserted a password for change
protection, please place it inside the password box. The unused hard
drive will be highlighted in a different color.
Only an automatic rebuilt can be setup for a Spare under RAID 1, CLONE,
RAID 5 modes.
2. Once selected, the available hard drive will show up individually. Check
the preferred hard drive as a Spare. Then, click on “Apply” icon to confirm.