Oyen Digital DATATALE RC-M4QJ 4-BAY RAID - Manual (Page 42)

42
5. Once the process is completed, the same popup window will reflect the
process-recording note for the “Event Log Viewer”. Click on the “OK” icon
to confirm.
6. The inserted hard drives will reflect the assigned RAID Mode and show
the basic information for them. The RAID System is now ready to be used
under the selected RAID Mode!
CHANGING OR DELETING AN ALREADY ASSIGNED RAID
MODE
To change the current assigned RAID Mode for the inserted hard drives for the
RAID System under the Advance Mode, the previous RAID Mode must be
deleted first. Please complete using the following steps:
Changing the RAID Mode deletes all data stored on the hard drives. If you
have saved data in the drives, backup all data before changing the RAID Mode.
1. Please click on the second sub-menu icon (second top). Once clicked, the
current assigned RAID Mode basic information should appear for the