Oyen Digital DATATALE RC-M4QJ 4-BAY RAID - Manual (Page 8)

8
SYSTEM REQUIREMENT
To use the DataTale SMART 4-bay RAID System, the minimum system
configuration in the host computer require the following:
PC
1GHz or faster CPU
512MB of RAM
Microsoft Windows 2000, XP, 2003, Vista, 2008, 7 or higher
One available USB, eSATA, IEEE 1394a, or IEEE 1394b port (depends
upon model)
MAC
Macintosh PowerPC or Intel processors
512MB of RAM
Mac OS X 10.4 or higher
One available USB, eSATA, IEEE 1394a, or IEEE 1394b port (depends
upon model)
3.5” SATA compatible hard drive is required for the RAID System unit.
Once the hard drives are formatted, the actual available storage capacity can
vary depending on the selected operating environment (normally 5-10 % less).
Any loss, corruption, or destruction of data is the sole responsibility of the
user of the RAID System. Under no circumstances will the manufacturer be held
liable for the recovery or restoration of any data.
OPTIONAL ACCESSORIES
eSATA PCI, PCI-X, or PCI-Express Card