Roxul Industrial Insulation Process - Manual (Page 15)

1.1 Planning and preparation
40” (1000) 40” (1000)
40” (1000)
31.5” (800)
A. Functional requirements
a) Object dimensions
The space requirements of the insulation must be
taken into account when the installation is being
designed and planned. Therefore, the insulation
thicknesses should be determined in the early
planning stages and the distances between the
individual objects should be taken into account in
the piping isometrics. To guarantee systematic
installation of the insulation materials and the
cladding without increased expense, observe the
minimum distances between the objects
as specified in the following illustrations.
Minimum distances between vessels and columns; dimensions in inches (mm)
12