Installation, Optional brick panels – Regency Panorama P36E Medium Gas Fireplace User Manual

Page 37

Advertising
background image

P36E-4 Zero Clearance Direct Vent Gas Fireplace

37

1) Undo the bottom 2 door latches and open and remove glass door.

Remove logs.

Note: The logs must not be in the unit.

2) Insert the back brick panel fi rst by carefully slipping it between the

back wall of the fi rebox and the rear log bracket.

3) Put the side panels in next. Slide them in from the front and push

them fl at up against the wall. Be very careful not to scratch them on
the fi rebox hardware.

4) Install the 2 brick retaining clips, one on each side.

OPTIONAL BRICK PANELS

INSTALLATION

Advertising