Code 11 set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual

Page 195

Advertising
background image

ENTER/EXIT PROGRAMMING MODE

Code 11 Set Length 1

Product Reference Guide

185

Code 11 Set Length 1

This feature specifies one of the barcode lengths for

Code 11 Length Control

. Length 1 is the

minimum label length if in

Variable Length

Mode, or the first fixed length if in

Fixed Length

Mode. Length includes the barcode’s check and data characters. The length can be set from 2 to
50 characters.

Table

18

provides some examples for setting Length 1. See

page 242

for detailed instructions on

setting this feature.

Table 18. Code 11 Length 1 Setting Examples

STEP

ACTION

EXAMPLES

1

Desired Setting (pad with

leading zeroes)

02 Characters

07 Characters

15 Characters

50 Characters

2

Scan ENTER/EXIT PROGRAMMING MODE

3

Scan SELECT CODE 11 LENGTH 1 SETTING

4

Scan Two Characters From

Appendix D, Keypad

‘0’ and ‘2’

‘0’ and ‘7’

‘1’ and ‘5’

‘5’ AND ‘0’

5

Scan ENTER/EXIT PROGRAMMING MODE

Select Code 11 Set Length 1 Setting

Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.

CANCEL

DEFAULT

04 = Length 1 is 4 Characters

Advertising