Wasp Barcode WLS9600 Product Reference Guide - Manual (Page 56)

ENTER/EXIT PROGRAMMING MODE
46 WLS9600
USB-OEM Device Usage
The USB-OEM protocol allows for the reader to be identified as one of two different types of
barcode scanners. Depending on what other scanners you may already have connected to a
USB-OEM POS, you may need to change this setting to enable all devices to communicate.
Options are:
• Table Top Scanner
• Handheld Scanner
USB-OEM Device Usage = Table Top Scanner
USB-OEM Device Usage = Handheld Scanner
DEFAULT
It may be necessary to switch device usage when connecting two
readers/scanners of the same type to a POS system.
Interface Options
Obey Scanner Configuration Host Commands
Ignore Scanner Configuration Host Commands
DEFAULT
This feature provides for an interface-specific control mechanism.