Wasp Barcode WLS9600 Product Reference Guide - Manual (Page 49)

ENTER/EXIT PROGRAMMING MODE Send Control Characters
Product Reference Guide 39
Send Control Characters
This feature Specifies how the reader transmits ASCII control characters to the host. Reference
Appendix E, Scancode Tables for more information about control characters.
Options are as follows:
Control Character 00 . Characters from 00 to 0x1F are sent as control character Ctrl+Keys,
special keys are located from 0x80 to 0xA1.
Control Character 01 . Characters from 00 to 0x1F are sent as control character Ctrl+Capital
Key, special keys are located from 0x80 to 0xA1.
Control Character 02 . Special keys are located from 00 to 0x1F and characters from 0x80 to
0xFE are intended as an extended ASCII table (Microsoft Windows Codepage 1252 — see
"Microsoft Windows Codepage 1252"on page 291 ).
DEFAULT
Wedge Send Control Characters = 00
Wedge Send Control Characters = 01
Wedge Send Control Characters = 02