Wasp Barcode WLS9600 Product Reference Guide - Manual (Page 93)

ENTER/EXIT PROGRAMMING MODE UPC-E Enable/Disable
Product Reference Guide 83
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E barcodes.
UPC-E = Disable
UPC-E = Enable
DEFAULT
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E barcode data.
UPC-E Check Character Transmission = Don’t Send
UPC-E Check Character Transmission = Send
DEFAULT