Upc-e number system character transmission, Upc-e minimum reads, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 95
Advertising
ENTER/EXIT PROGRAMMING MODE
UPC-E Number System Character Transmission
Product Reference Guide
85
UPC-E Number System Character Transmission
This feature enables/disables transmission of the UPC-E system number character.
UPC-E Number System Character = Do not transmit
UPC-E Number System Character = Transmit
DEFAULT
UPC-E Minimum Reads
Specifies the minimum number of consecutive times a UPC-E label must be decoded before it is
accepted as a good read.
UPC-E Minimum Reads = 1
UPC-E Minimum Reads = 2
DEFAULT
UPC-E Minimum Reads = 3
UPC-E Minimum Reads = 4
Advertising