Wasp Barcode WLS8600 Product Reference Guide - Manual (Page 25)

Enter Configuration Exit and Save Configuration
М$+;О
RS-232
М$-?О
RX TIMEOUT
timeout control in reception from Host
МCL5О
Read 2 numbers from the table where:
00 = TIMEOUT disabled
01-99 = TIMEOUT from .1 to 9.9 seconds
 rx timeout 5 seconds
See par. 4.1.4 for details.
SERIAL TRIGGER LOCK
 disabled
ÌCR0qÎ
enable and select characters
ÌCR1tÎ
Read 2 characters from the Hex/Numeric table in the range 00-FE where:
− First Character enables device trigger
− Second Character inhibits device trigger until the first character is received again.
19