Wasp Barcode WLS8600 Product Reference Guide - Manual (Page 59)

Enter Configuration Exit and Save Configuration
М$+;О
READING PARAMETERS
М$-?О
SAFETY TIME
safety time
ÌBE&Î
Limits same code consecutive reading.
Read 2 numbers in the range 00-99:
00 = no same code consecutive reading until reader is
removed (no decoding) for at least 400 ms.
01-99 = timeout from .1 to 9.9 seconds before a consecutive read
on same code.
 safety time = 0.5 sec
See par. 4.5.5 for details.
BEEPER INTENSITY
* very low intensity
ÌBG0ZÎ
low intensity
medium intensity
МBG1]О
МBG2`О
 high intensity
ÌBG3cÎ
* This sets the beeper OFF for data entry, while for all other beeper signals it has the
meaning “very low intensity”. The Beeper Intensity parameter is effective for all operating
conditions described in par. 5.2.
53