Wasp Barcode WLS8600 Product Reference Guide - Manual (Page 35)

Enter Configuration Exit and Save Configuration
М$+;О
WEDGE
М$-?О
CAPS LOCK AUTO-RECOGNITION (IBM AT COMPATIBLE ONLY)
disable
ÌFP0pÎ
 enable
ÌFP1sÎ
NUM LOCK
toggle num lock
ÌFL1kÎ
 num lock unchanged
ÌFL0hÎ
This selection is used together with the Alt Mode interface selection for AT or Notebook PCs.
It changes the way the Alt Mode procedure is executed; therefore it should be set as follows:
• if your keyboard Num Lock is normally on use num lock unchanged
• if your keyboard Num Lock is normally off use toggle num lock
In this way the device will execute the Alt Mode procedure correctly for your application.
INTER-CHARACTER DELAY
delay between characters transmitted to Host
МCK3О
Read 2 numbers from the table where:
00 = DELAY disabled
01-99 = DELAY from 1 to 99 milliseconds
 delay disabled
29